custom engineering

custom engineering

engineered solutions for today's problems

January 21, 2019

Spectrum Engineering has settled in to the new year with lots of exciting work.  Currently, we are designing a new manufacturing fixture for one of Lode King's lines.  We also have projects with Motor Coach Industries and a new client, New Flyer Industries.  It is great to be busy!  What else would we be doing when the weather hits -30 degrees Celsius!!

J Lift Safety Stands Update

The J Lift Safety Stands were tested at MCI this past weekend.  You can see that they are in place and holding the entire coach as it awaits undercoating.

Meridian Weld Cell Installation

A few weeks ago Spectrum Engineering together with Norgen Technologies packed up the robot at our testing facility and installed it at the Meridian shop.  There is still programming which needs to be completed before it can be tested for production but our part of the project is complete.


Lift Stands for Motor Coach Industries

Four of these lift stands were designed by Hin Yat and fabricated for Motor Coach Industries to support an entire coach.


These 550 pound stands have a hidden caster system which make the stands very easy to maneuver into place.

Lode King Suspension Assembly Fixture
Friday, 05 June 2015 13:13

Lode King asked Spectrum to design a new assembly fixture for building the heavy duty suspension frames for one of their lines.  John spent 2 days with them in the shop assembling the fixture.  The assembly went very smoothly.  Lode King provided a great team with very skilled people.

These are all of the parts before any assembly began.







This was the progress made at the end of day one

This was the progress made after Day One








The fixture very near completion at the end of Day Two!

Lode King Suspension fixture update
Monday, 28 September 2015 13:54

This past month has been a busy time finishing up some fairly large projects.  One of them was the suspension assembly fixture for Lode King.  The fixture itself was welded up quite a few months ago.  This past month, the ALM automotive lift components arrived so the assembly of the fixture onto the lift device was almost completed.  This is a very impressive structure.  Here is a a picture of the fixture attached to the lift device with the trailer components and axles in place and one of Mike from Norjen Consulting hard at work.

<< Start < Prev 1 2 Next > End >>

Page 2 of 2
Joomla 1.5 Templates by Joomlashack